korialstraz
New member
Re: Adria - Inventory Management System
Awww :S
Looking forward to it!
Awww :S
Looking forward to it!
Adria - Inventory Management System
- Thread starter Kijya
- Start date
JustAPlayer
New member
Re: Adria - Inventory Management System
Here it is a beta version of 4.1.0 with some architectural changes + the stuff I mentioned above.
[highlight]This version is only for testing and might have bugs.[/highlight]
Please post feedback if you test.
Here it is a beta version of 4.1.0 with some architectural changes + the stuff I mentioned above.
[highlight]This version is only for testing and might have bugs.[/highlight]
Please post feedback if you test.
Last edited:
korialstraz
New member
Re: Adria - Inventory Management System
Yay beta!
Too bad I'm caught up in RL stuff this week :S
Yay beta!
Too bad I'm caught up in RL stuff this week :S
Re: Adria - Inventory Management System
Pretty nice changes from what I've seen so far.
Is it possible to edit properties (realm,Hc/Sc) on a whole account? I can only seem to manage to edit single characters.
Pretty nice changes from what I've seen so far.
Is it possible to edit properties (realm,Hc/Sc) on a whole account? I can only seem to manage to edit single characters.
JustAPlayer
New member
Re: Adria - Inventory Management System
nope just for chars
although the account has the property realm; but in the same account u can have sc and hc, classic or lod etc. so i moved this property to char level because it was easier to manage. but if someone could make a valid point why it has to be in another way (and not only "nice to have") i could change the behavior. for now it seemed to much work and too little gain.
nope just for chars
although the account has the property realm; but in the same account u can have sc and hc, classic or lod etc. so i moved this property to char level because it was easier to manage. but if someone could make a valid point why it has to be in another way (and not only "nice to have") i could change the behavior. for now it seemed to much work and too little gain.
korialstraz
New member
Re: Adria - Inventory Management System
I guess the only reason I can think of is that some people (like me) seperate their HC accounts from SC etc. I don't see why you would need an account based property for this though, because if you do that you probably know which account is for what.
I guess the only reason I can think of is that some people (like me) seperate their HC accounts from SC etc. I don't see why you would need an account based property for this though, because if you do that you probably know which account is for what.
Re: Adria - Inventory Management System
Yup, this was the reason I was looking for that option.
Well I obviously know which account is which, but if I want to use the program's search filters :scratchchin:.
Anyway, it's no big deal...tagging the characters one by one is easy enough, I just wanted to know if the option is supposed to be there since the option is called 'edit account/character'.
Yup, this was the reason I was looking for that option.
Well I obviously know which account is which, but if I want to use the program's search filters :scratchchin:.
Anyway, it's no big deal...tagging the characters one by one is easy enough, I just wanted to know if the option is supposed to be there since the option is called 'edit account/character'.
JustAPlayer
New member
Re: Adria - Inventory Management System
that is a naming mistake (copy paste)
that is a naming mistake (copy paste)
MariusHering
New member
Re: Adria - Inventory Management System
Ok, maybe I am just doing it wrong, but when generating a trade list (with first category class) Adria just groups all items together, it seems to be in the order they were scanned, but no class headings are given. I checked the manual, but it doesn't say anything, other that if class is selected as a category, items will be classed by armor, gloves, etc, which it incidentally doesn't do.
I also noticed, when trying to scan a crescent moon zerker axe, it always saved it as a white axe, though the stats were still visible. I tried moving it around and eventually it was scanned as Crescent Moon, when I put it to the top left of the inventory.
Keep up the awesome work :thumbup:
Ok, maybe I am just doing it wrong, but when generating a trade list (with first category class) Adria just groups all items together, it seems to be in the order they were scanned, but no class headings are given. I checked the manual, but it doesn't say anything, other that if class is selected as a category, items will be classed by armor, gloves, etc, which it incidentally doesn't do.
I also noticed, when trying to scan a crescent moon zerker axe, it always saved it as a white axe, though the stats were still visible. I tried moving it around and eventually it was scanned as Crescent Moon, when I put it to the top left of the inventory.
Keep up the awesome work :thumbup:
JustAPlayer
New member
Re: Adria - Inventory Management System
my first suggestion is to go in menu and do a "restore grid layout".
the grid column headers can be dragged to and from the top gray area (above grid). any colum added to the gray area means that the grid will have the items grouped by that column. if you drag the header back to the grid the grouping criteria is gone. u also can click on any header to sort up or down by that column. additionaly you can change column order or even hide some columns (i don't remember now the name of the command but it should be near the "restore ..." stuff in menu).
my first suggestion is to go in menu and do a "restore grid layout".
the grid column headers can be dragged to and from the top gray area (above grid). any colum added to the gray area means that the grid will have the items grouped by that column. if you drag the header back to the grid the grouping criteria is gone. u also can click on any header to sort up or down by that column. additionaly you can change column order or even hide some columns (i don't remember now the name of the command but it should be near the "restore ..." stuff in menu).
MariusHering
New member
Re: Adria - Inventory Management System
Hmm, seems you misunderstood me a bit here
I meant the ordering of items after generating a trade list, i.e. the ordering of the trade list itself. (The item list in the middle is fine I now changed the settings of it to be: Class - Type, but in the trade list it still groups everything under: gold, blue, green, etc.
Hmm, seems you misunderstood me a bit here
I meant the ordering of items after generating a trade list, i.e. the ordering of the trade list itself. (The item list in the middle is fine I now changed the settings of it to be: Class - Type, but in the trade list it still groups everything under: gold, blue, green, etc.Re: Adria - Inventory Management System
I'm not quite sure what could be wrong, did you press cancel instead of ok so that the change in settings didn't get saved?
For me it's working as intended. Could you clarify with an example how you wish the tradelist to look and provide screenshots of your current tradelist settings tabs? Or post how the tradelist printout looks now and point out what you want removed/added in the formatting.
I'm not quite sure what could be wrong, did you press cancel instead of ok so that the change in settings didn't get saved?
For me it's working as intended. Could you clarify with an example how you wish the tradelist to look and provide screenshots of your current tradelist settings tabs? Or post how the tradelist printout looks now and point out what you want removed/added in the formatting.
MariusHering
New member
Re: Adria - Inventory Management System
Ok, hope I did this right:
First try I set the configuration under trade list 1 to: Class and then Type see here
The result was that the program still only grouped the items under Type: i.e. Blue, Green, Gold, etc, see here.
Now, I tried again, and set the Tradelist 1 configuration to: Class and None, here
And then the program grouped all items together, without any categorization lookie
Ok, hope I did this right:
First try I set the configuration under trade list 1 to: Class and then Type see here
The result was that the program still only grouped the items under Type: i.e. Blue, Green, Gold, etc, see here.
Now, I tried again, and set the Tradelist 1 configuration to: Class and None, here
And then the program grouped all items together, without any categorization lookie
Re: Adria - Inventory Management System
So in short the level one header isn't inserted correctly. Strange, it's working for me and most other people, I'm not sure what it could be but press the default button in the tradelist settings 1 and try another printout. While I wouldn't think it is the reason, try using less items and noting if there's a special item that causes the effect.
I though the code was written so that the items really shouldn't affect that part of the printout function but maybe I was wrong once again.
You can set the categorization to None - Class, that should get you categorization by class only too, using the header 2 style.
As for a permanent solution, know that I'm working on a new tradelist printing system ... progress is slow, but I' feel like I've got a really solid idea on how to make a better system.
So in short the level one header isn't inserted correctly. Strange, it's working for me and most other people, I'm not sure what it could be but press the default button in the tradelist settings 1 and try another printout. While I wouldn't think it is the reason, try using less items and noting if there's a special item that causes the effect.
I though the code was written so that the items really shouldn't affect that part of the printout function but maybe I was wrong once again.
You can set the categorization to None - Class, that should get you categorization by class only too, using the header 2 style.
As for a permanent solution, know that I'm working on a new tradelist printing system ... progress is slow, but I' feel like I've got a really solid idea on how to make a better system.
JustAPlayer
New member
Re: Adria - Inventory Management System
please look for adria.log file and post it here if you find it. as i said this last version is a beta and therefore it might have some bugs.
please look for adria.log file and post it here if you find it. as i said this last version is a beta and therefore it might have some bugs.
MariusHering
New member
Re: Adria - Inventory Management System
Ok, so the tradelist problem already existed before I upgraded to the beta version.
I could not find the adria.log file on my computer, very strange...
As for reset to default and the classification None-Class, neither works. I tried using less items, but it still would not work...
Oh and funny thing, I had a wizardspike on one of my chars, but even when I just clicked on one other char, it showed up there, but I that did not affect the tradelist, as I deleted the item and tried again still no luck, guess I will wait for the new tradelist system
Ok, so the tradelist problem already existed before I upgraded to the beta version.
I could not find the adria.log file on my computer, very strange...
As for reset to default and the classification None-Class, neither works. I tried using less items, but it still would not work...
Oh and funny thing, I had a wizardspike on one of my chars, but even when I just clicked on one other char, it showed up there
, but I that did not affect the tradelist, as I deleted the item and tried again still no luck, guess I will wait for the new tradelist systemJustAPlayer
New member
Re: Adria - Inventory Management System
what i meant was that i made some structural chances in this beta so it can be that some parts are broken now. kyija said that it works for him and afaik he uses old version so i assumed that last code is faulty.
what i meant was that i made some structural chances in this beta so it can be that some parts are broken now. kyija said that it works for him and afaik he uses old version so i assumed that last code is faulty.
MariusHering
New member
Re: Adria - Inventory Management System
Yes but I also encountered this problem with the old version, which is why I downloaded the beta as I though maybe it fixed the problem. Maybe its just my computer that's f'ed...
Yes but I also encountered this problem with the old version, which is why I downloaded the beta as I though maybe it fixed the problem. Maybe its just my computer that's f'ed...
