ATMA/GoMule/RWM etc - Help Thread

Status
Not open for further replies.
Re: ATMA/GoMule/RWM etc - Help Thread

hi all, getting really close to being able to build my insight so tonight it tried to make an edge to check if i was able to build ladder runewords. it didnt work, very sad i know. i found the mac link for the program and it says download and unzip. but when i dl it, it is unzipped. it is a full daiblo carbon file, i can click it and play and all...anyone able to help?
 
Re: ATMA/GoMule/RWM etc - Help Thread

The way the RWM is on a Mac it is a whole carbon. I don't use a Mac so my knowledge is minimal but that download should contain D2 LoD for Mac 1.13c with RWM enabled.

max did a guide here. That was for 1.12 where RRM was enabled too but the 1.13 install should be the same with the exception of no longer needing RRM.

If you are stuck and no one can help here, a PM to him or jamesixgun might do the trick as they both use macs. :)
 
Re: ATMA/GoMule/RWM etc - Help Thread

I'm using Windows Vista. Downloaded the Rune Word Mod to desktop, moved the folder "runewords" to my C\Program Files\Diablo II folder. Created a shortcut from the Diablo II launcher and moved the shortcut to my desktop. Edited properties to have -direct -txt and started playing.

Tried to make a "Leaf" runeword, but instead of showing "Leaf" I'm just getting "TirRal". Re-read the instructions, realized what I did wrong;

Added C\Program Files\Diablo 2\Runewords as where it should open and tried again - My staff still says "TirRal". Am I installing RWM incorrectly or is it that I created the staff without RWM properly installed, so now it's a bust?
 
Re: ATMA/GoMule/RWM etc - Help Thread

Leaf doesn't need RWM to work. Are you sure you made it in a correct weapon type?

Ed: It doesn't work in wands.
 
Re: ATMA/GoMule/RWM etc - Help Thread

Oh, I figured it out - I had my runes in a Rare staff. Forgot that doesn't work.
I found a 2os Staff with +3 Warmth though, and with the Leaf runeword, I have 10 in Warmth now...With only one point invested o_O Aweshum!
 
Last edited:
Re: ATMA/GoMule/RWM etc - Help Thread

Runewords need to be made in grey items. Magic or rare items won't work.
 
Re: ATMA/GoMule/RWM etc - Help Thread

I'm also not entirely sure if there is a workable RWM/RRM for 1.10a. However, if you would like to test one out, you can place the 'data' folder directly in your 1.10a TrenShadow folder and add "-direct" (without the quotations) to the end of the "Run" line of the shortcut you use to start in 1.10a. For more information, see 7c of my TrenShadow Guide.
 
Re: ATMA/GoMule/RWM etc - Help Thread

mattinm said:
I'm also not entirely sure if there is a workable RWM/RRM for 1.10a. However, if you would like to test one out, you can place the 'data' folder directly in your 1.10a TrenShadow folder and add "-direct" (without the quotations) to the end of the "Run" line of the shortcut you use to start in 1.10a. For more information, see 7c of my TrenShadow Guide.
Click to expand...

Thank you, RRM works great now:thumbup:


 
Re: ATMA/GoMule/RWM etc - Help Thread

ATMA question: How do I find out if any of my items are duped? I went to View -> DupeDetector -> Stash and clicked "Detect Dupes" but as far as I can tell, nothing happened. Does that mean I'm dupe free, is there supposed to be a message that says 'no dupes found', how does it work?

GoMule: I'd like to create one of those fancy Flavie reports to keep track of my grail - my question is, do I need to move everything from ATMA to GoMule so that it can look through the items, or is there a way to choose my ATMA stashes when I get a flavie report?
 
Re: ATMA/GoMule/RWM etc - Help Thread

I believe Dupe Detector only shows something if it finds matching fingerprints.

As for the GoMule question, GoMule uses the ATMA stash format for its stashes, and as such should be able to open ATMA stashes. You could simply open all the ATMA stashes in GoMule, create the report, and exit GoMule. Repeat as necessary.

I'd recommend giving GoMule a try on its own accord (if you haven't already) to see which muling program you prefer. The multiple item selection, "Pick up from...", "Drop All", and filtering are reasons I cannot go back to ATMA. Simply too convenient to plop everything into a single stash (in 2 clicks) while MFing and then filter everything out into their respective stashes when I'm done (e.g. sets, uniques, socketables, etc). Thinking about how much time I would lose muling off the ATMA way makes me shiver.

But in the end it's about preference, as just about everything is on this forum. At least using the Flavie function in GoMule shouldn't be too much of a hassle :).
 
Re: ATMA/GoMule/RWM etc - Help Thread

Oh, I thought it would tell you if the item had been hotmuled or whatever. I guess you can't be sure if you're getting legit items then?

As for GoMule, I've tried it - but after being so used to ATMA, it just feels really clumsy and confusing. Besides, every time I try to create a new stash it says I've been disconnected :|
 
Re: ATMA/GoMule/RWM etc - Help Thread

AlexPractice said:
Oh, I thought it would tell you if the item had been hotmuled or whatever. I guess you can't be sure if you're getting legit items then?
Click to expand...

Are you referring to a trade or stuff you have done yourself? Other than trust there is little in the way of making sure that the item you receive in trade is legit or not or wether they kept the item after they traded them to you. GoMule and ATMA will only detect dupes that you may accidently have two of in your stashes. It will not check other people's computers or across the internet for some big database of items that have dropped. That is why some only go self-found like myself.

There IS a method called hotmuling that is only done with gheed's charm since you can only carry one. In order to keep both you open your character in ATMA/GoMule and mule off the old one. Then in the game you drop the old one and pickup the new one. Selling the old one or anything else than leaving it on the ground is illegal on these forums.



 
Re: ATMA/GoMule/RWM etc - Help Thread

Well for one it would be nice to detect other people's dupes but i guess that's not possible - also I thought I had S&E my game after minimizing to check email, then I went on ATMA to stash items before resuming - and so I ended up with dupes. I deleted the ones with fingerprints but gems and runes don't have one so I just deleted both stashes to be safe :( Thanks for the info though!

I have another question - how do I send a stash while trading? In my email, I went to attachments, C/program files/ATMA V and there are no visible .d2x files, and I can't change the search parameters to include .d2x so I'm kind of lost on how to trade items now :|
 
Re: ATMA/GoMule/RWM etc - Help Thread

There may be another way, but if you know the name of the file you can just type it in, instead of manually selecting it. just make sure you are in the right folder when you type it of course.
 
Re: ATMA/GoMule/RWM etc - Help Thread

Nah I tried typing in the name and got no results, but I did figure it out - creating shortcuts doesn't work you just have to save the stash to your desktop and then delete it after. xD
 
Re: ATMA/GoMule/RWM etc - Help Thread

Cool, glad you got it, I was pretty sure that was how I had done it in the past, but I guess not
 
Re: ATMA/GoMule/RWM etc - Help Thread

i have downloaded v1.07 and since the runes there show up white, i thought it would be usefull to get RRM to

now there is 1 problem
since the "start in"is different to the normal one i have no idea how to make it work, so my main questions are, in what folder should the RRM be and how must i make the target/start in to make it work?
 
Re: ATMA/GoMule/RWM etc - Help Thread

stefan said:
i have downloaded v1.07 and since the runes there show up white, i thought it would be usefull to get RRM to

now there is 1 problem
since the "start in"is different to the normal one i have no idea how to make it work, so my main questions are, in what folder should the RRM be and how must i make the target/start in to make it work?
Click to expand...

According to the Trendshadow guide (version 1.00)
http://www.purediablo.com/forums/showthread.php?p=7720908#post7720908
Trendshadow guide by mattinm said:
Q: Can I run mods (e.g. RWM/RRM in 1.12a) with TrenShadow?
A: Certainly! Simply copy the data folder from the mod (e.g. RedRuneMod/data) into your version folder (e.g. 1.12a/data). Now, on your shortcut to start the version, make sure to add -direct -txt to the end of the line (e.g. Target = "C:/Program Files/Diablo II/1.12a/LaunchModGame.vbs" -direct -txt). Make sure you also add this to your x2 shortcut.

EDIT: Adding the -txt to the end of the shortcut only works with my modified version of TrenShadow, detailed below. To use a modification with the unmodified TrenShadow, simply click 'Yes' when asked if you'd like to create the binary files.
Click to expand...

So basically from what I can see is your shortcut should be
Target
"C: \program files\Diablo II\1.07\LaunchModGame.vbs" -direct -txt
Start In
"C: \program files\Diablo II\1.07\Data\RRM"

Now run the game from your new shortcut. Hope this works. I do not use Trendshadow. If I did, this is what I would think would work and how I would install it from mattinm's directions.



 
Status
Not open for further replies.
Remove Ads - Go PurePremium

Latest posts

Back
Top